PERMADECK™ Products

PERMADECK™ offers four different decking board profiles plus various finishing fascias and trims. All PERMADECK™ products are quick and easy to install and can be ripped down easily using basic woodworking tools. Cutting PERMADECK™ is similar to working with MDF, a delight to work with and easy to saw, cut and plane. It can be mitred, planed and drilled as necessary.

Latitudes EverX

Permadeck™ Latitudes EverX is a relatively new profile but is moulded from the same material as the tried, true and tested Latitudes Architectural product.  The Latitudes EverX profile gives Permadeck another premium product at a lower price point without any compromise in the strength, stability or durability and with the same good looking, non slip 'brushed' surface finish.

Like the Architectural board it is made in the USA . It is solid composite and is 135mm wide x 24mm thick x 5800mm long. It is sold in full board lengths. The profile of the decking board integrates a clever hidden fastening system which can eliminate the use of nails and visible fastenings on your deck.
It has a brushed surface finish which hides marks and scratches very well and a ribbed underside which allows the joists to breathe.
Permadeck™ Latitudes EverX can be installed on joist centres of up to 450mm. To find out more call our decking experts at 07 928 6564.
Find out more here


Latitudes Architectural

This is the premium decking board in the range. Permadeck™ Latitudes Architectural is made in the USA and has a pedigree that positions this board as NO1 internationally. It is solid composite and is 137mm wide, x 25mm thick, x 5800mm long. It is sold in full board lengths. The profile of the decking board integrates a clever hidden fastening system which eliminates the use of nails and visible fastenings on your deck.
It has a brushed finish on both sides (is reversible) so generally hides marks and scratches very well.
Permadeck™ Latitudes Architectural can be installed on joist centres of up to 450mm
Find out more here


Latitudes Marine

Permadeck™ Latitudes Marine decking navigates innovation with composite boards specifically designed for use at marinas, on boardwalks and on docks where more robust boards are needed.
Latitudes Marine is thicker than typical composite deck boards and is engineered for use on wide joist spacing.

Latitudes Marine decking dimensions are 32mm x 138mm x 4800mm, with a profiled appearance designed for marina decking where a maximum of 600mm on-center joist spacing is needed. Refer to the load and span chart for more information.
Find out more here


Matrix Walkway Panels

Matrix Walkway

Matrix Walkway panels are injection moulded in one piece from UV-stabilised polypropylene, one of the most durable polymers, to ensure many years of maintenance free outdoor life.  They are completely impervious to insects, fresh and salt water and most chemicals, and will not rot, rust or mildew.

Matrix Walkway panels can be used wherever you need a light weight strong floor that allows through water, air and light, especially in environmentally sensitive areas
They clip together in either direction to make installation easy, and are then attached to the supporting structure with screws through moulded-in screw slots, which allow for thermal expansion and contraction. They can also be used either laid directly on the ground or supported on plastic pads for easier cleaning. Refer to the Matrix Walkway page for further information.
Find out more here